CHARACTERISTICS OF PRESSURE WAVE PROPAGATION IN EMULSION EXPLOSIVES
F. Sumiya, Y. Hirosaki, Y. Kato, Y. Ogata, M. Seto & K. Katsuyama
COMPUTER MODELING OF BENCH BLASTING FOR GRADE CONTROL
P. Dare-Bryan, L. Wade & M. Randall
APPLICATION OF NUMERICAL MODELING TO EXAMINE DAMAGE IN WALL
CONTROL OPERATIONS
Takis Katsabanis
CONSIDERATIONS FOR THE EXCAVATION OF SUBSURFACE FACILITIES BY DRILL
AND BLAST METHODS, YUCCA MOUNTAIN PROJECT
R. Keller & J. Ryan
DISPLACEMENT AND MIXING OF BLASTED SEDIMENTARY ROCKS IN QUARRYING
S. Chung, S. Gosch, J. Carpenter & J. Breedlove
EFFECT OF FRAGMENTATION ON LOADER EFFICIENCY
S. Singh
DEGREE OF ROCK FRAGMENTATION UNDER HIGH STRAIN RATES
B. Mohanty & U. Prasad
ANFO IS NOT ALWAYS ANFO
E. Nygaard & K. Voges
THE IMPORTANCE OF THE EXPLOSIVE CONFINEMENT
A. Cancec, N. Gallardo & M. Gutierrez
CARBON MONOXIDE POISONING AT A SURFACE COAL MINE ... A CASE STUDY
K. Eltschlager, W. Shuss & T. Kovalchuk
FACTORS AFFECTING FUMES PRODUCTION OF AN EMULSION AND ANFO/EMULSION
BLENDS
J. Rowland, R. Mainiero & D. Hurd
A SUMMARY OF SUBSURFACE CARBON MONOXIDE MIGRATION INCIDENTS
L. Santis
FIELD APPLICATION AND QUANTIFICATION OF ELECTRONIC DETONATOR
TECHNOLOGY
R. McClure & D. Bartley
APPLICATION OF ELECTRONIC DETONATORS IN UNDERGROUND DRIFT
DEVELOPMENT
L. Mirabelli
A NEW DETONATING CORD FOR REDUCING UNWANTED DAMAGE IN CONTROLLED
BLASTING
T. Barkley, R. Lee & J. Rogers
ATTENTUATION OF BLASTING VIBRATIONS IN SOUTH FLORIDA, PART II
J. Pepper, G. McLellan & M. Johnson
VIBRATION AND STRUCTURE RESPONSE FROM DADE COUNTY QUARRY BLASTING
D. Siskind & M. Stagg
THE EFFECTS OF QUARRY BLASTING ON THE STRUCTURAL INTEGRITY OF
A DISUSED RAILWAY TUNNEL
W. Birch, M. Kaslik & A. Cobb
GRAVOIS BLUFFS: REVIEW OF A SUCCESSFUL LARGE-SCALE BLAST-MONITORING
PROGRAM
D. Weidner
BENCH INCREASE ANGLE
M. Arellano & J. Delgado
MINE AUTOMATION PROGRAM DRILL & BLAST ANALYSIS
M. Paventi, W. Lidkea & L. Mirabelli
UNLOCKING THE WEALTH FROM BENEFIT SHARING IN DRILL AND BLAST
M. Wiggin, L. Logan
DRILL MONITORING AND GPS DEVELOPMENTS AND THEIR IMPACTS ON THE DRILL
TO MILL PROCESS
J. Vynne
AN ADVANCED BLASTING SCALED DISTANCE MODEL INCORPORATING INDIVIDUAL
LOCATION RESPONSE
M. Pegden, W. Birch & R. West
STANDARDS, ENVIRONMENTAL REGULATIONS AND CONSEQUENCES FOR
TUNNEL BLASTING PROJECTS IN URBAN AREAS IN SWEDEN
D. Jonson & G. Rundqvist
VARIABILITY OF VIBRATION SIGNALS FROM SINGLE HOLE QUARRY BLASTS
R. Farnfield & G. Yuill
WALL CONTROL AT THE FREEPORT GRASBERG OPENCUT MINE: VIBRATION AND
GAS PENETRATION MEASUREMENTS AS A PRECURSOR TO IMPROVEMENTS
A. Spathis, G. Smith, I. Yacob & A. Labriola
ALL IN THE TIMING, NEED COVER, MAKE COVER
S. Paterson
ROCK SLOPE REMEDIATION ON THE PENNSYLVANIA TURNPIKE –
BEDFORD PENNSYLVANIA
C. Goumans & R. Woolf
BACK TO SCHOOL ON CONSTRUCTION BLASTING, RULES OF THUMB REVISITED
J. Wallace
EMISSIONS FROM EXPLOSIVES
V. Wetzig
ANFO’S BEHAVIOR IN HEIGHT-TO-DETONATION AND OTHER THERMAL STIMULUS
TESTS
E. Contestabile, B. Von Rosen & P. Lightfoot
INVESTIGATION OF ANFO’S BEHAVIOR UNDER VARIOUS CONDITIONS - PHASE I
B. Von Rosen & E. Consteabile
