Technical Information Database

(Should you have difficulty accessing any of these abstracts, you may request the document
by emailing info@isee.org)

EVALUATION OF PROPAGATION SENSITIVITY OF COMMERCIAL
EXPLOSIVES IN LARGE DIAMETER HOLES
A.W. Bauer, A. Bauer, K.K. Feng and R.R. Vandebeek.

CHARGE DECOUPLING AND ITS EFFECT ON ENERGY RELEASE AND
TRANSMISSION FOR ONE DYNAMITE AND WATER GEL EXPLOSIVE
C.J. Konya, R. Britton and S. Lukovic

EFFECT OF JOINT SEPARATION AND FILLING ON PRE-SPLIT BLASTING
P.N. Worsey and S. Qu

FINITE ELEMENT MODELLlNG OF PRESPLIT BLASTING USING MEASURED
PRESSURE TIME CURVES
A. Bauer and D. Frantzos

FRAGMENTATION MEASUREMENT FOR EXPERIMENTAL BLASTING IN VIRGINIA
N.H. Maerz, J.A. Franklin and D.L. Coursen

MODEL STUDIES OF LOADING CAPACITY AS A FUNCTION OF
FRAGMENTATION FROM BLASTING
K. Nielsen

OPTIMUM DESIGN FOR BLASTING PLASTIC MATERIAL USING HIGH SPEED
PHOTOGRAPHY
S.H. Chung

DYNAMIC RESPONSE OF A FULLY GROUTED RESIN ROOF BOLT TO BLAST LOADING
F.O. Otuonye

PREDICTING LOW-AMPLITUDE LONG-DISTANCE GROUND VIBRATIONS
INDUCED BY BLASTING
N. Mojtabai and J.J.K. Daemen

AN IMPROVED SCALING PROCEDURE FOR CLOSE-IN BLAST MOTIONS
B.B. Redpath and T.E. Ricketts

MODELING ROCK FRACTURING IN BENCH-BLASTING PROBLEMS
J.S. Kuszmaul

CALCULATION OF ROCK MOTION DURING BENCH BLASTING
E. Gorham-Bergeron